TransWikia.com
  1. All Categories
  2. Electrical Engineering

Electrical Engineering : Recent Questions and Answers (Page 54)

Find answers to your questions about Electrical Engineering or help others by answering their Electrical Engineering questions.

MCP3461 analog side broken "somehow"?

I am trying to interface with an MCP3461 ADC. I follow the SPI protocol described in the datasheet, and can read the output normally. I use the...

Asked on 12/30/2020 by Spiros Makris

1 answer

UVC Lamp causes Atmega 328P to malfunction

I have got an Atmega328p which connected to a TFT LCD 1.3 inch using SPI. The Atmega 328P is powered through a 5V adaptor. The problem is most of the...

Asked on 12/29/2020 by shafiyyah

1 answer

Voltage doubler for LED backlight

I'm sketching out a design for an easily and cheaply built handheld computer based on an ARM microcontroller, and thinking of using a small LCD display. The display has...

Asked on 12/29/2020 by Mike Spivey

2 answer

So the brushes in a commutator are fixed and assume a constant polarity, so how does the commutator reverse the direction of current?

I know this is probably one of the most common questions ever for someone who just started studying DC machines and I would probably get told by someone to just...

Asked on 12/29/2020

3 answer

I/O panel filtering for shielded room

We are looking into setting up a very basic shielded chamber inside a small room at my company to be able to perform some basic relative radiated EMC measurements. We...

Asked on 12/29/2020 by Lars Petersson

1 answer

Mute / blank an amplifier fast

I would like to build a circuit to mute an RF Class A amplifier to supress noise while I am not transmitting. I transmit ~20 us long pulses at ~1-5...

Asked on 12/28/2020 by P. Egli

0 answer

What are the important values of GNSS antennas

I want to compare different GNSS antennas, but I don't really know what values to compare. How can I compare them with datasheets looking like this? Edit:...

Asked on 12/28/2020

0 answer

MOSFET Driver P-channel

I want to create a DC-chopper to drive a motor. I found the following schematic online:However i don't understand how the...

Asked on 12/28/2020 by Brent Thierens

0 answer

How to calculate torque of the motor?

I have bought a motor from amazon. But the problem is no data is provided with it. Now I want to calculate the torque of the motor. I have measured...

Asked on 12/27/2020 by Tushar Dubey

1 answer

Electro magnetic interferences (EMI) generated by power circuit reset low voltage integrated circuits (ICs)

The main question here is (explanation will follow):Is there a way to filter out low voltage oscillations (>10MHz) on pins that have to stay high for the system to...

Asked on 12/27/2020 by Krzych

0 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP