TransWikia.com
  1. All Categories
  2. Woodworking

Woodworking : Recent Questions and Answers (Page 13)

Find answers to your questions about Woodworking or help others by answering their Woodworking questions.

Looking for the LEAST fragrant wood for storing tea

I am looking to create something similar to a cigar humidor for storing Pu'er tea which requires relatively high humidity and temperature. However, the important difference is I would like...

Asked on 04/27/2021 by Doogan

1 answer

fixing water spots on boiled linseed finish

I learned recently that boiled linseed is not a great finish when exposed to any amount of water. I have a piece near a sink that gets a few drops...

Asked on 04/23/2021 by gothicsurf

1 answer

Laminating a long beam for strength

Very similar to this question I want to create a balance beam to span the narrow part of a swimming pool which is 16'. I'm thinking of a length...

Asked on 04/22/2021

2 answer

Blotchy pine doors

I used MinWax Polyshades on new paneled pine doors resulting in a blotchy finish. Would it be better to apply a second coat, try a gel stain or a regular...

Asked on 04/18/2021 by Janice Smith

0 answer

Can I set create a dust collection system that discharges everything into sealed container instead of a filter bag?

My dust collection system is already up and running. I am about to add a new toy to the mix and started looking at my whole collection system again with...

Asked on 04/16/2021 by Woody Woodman

1 answer

Correct angle for a bull-nose rabbet plane (Record 76) blade

I have a Record 76 rabbet plane. The plane is bevel side up, and the primary bevels as ground by the manufacturer appear to be 45° or close to it....

Asked on 04/12/2021 by 111111

1 answer

What are the standard dimensions for biscuit joints?

I recently acquired a Ryobi biscuit jointer and purchased some Freud biscuits. They didn't fit the slots made by the biscuit jointer very well. I am aware that the biscuits...

Asked on 04/09/2021 by dug

2 answer

How can I fix smears after wipe on gel finish?

I have a problem with the gel topcoat that I applied on my kitchen table. I decided to restore our old kitchen table so I sanded it down, used General...

Asked on 04/08/2021 by Joanna

1 answer

I have a new pine floor finished with 2 coats poly. What should I use to fill in some countersunk nail holes before 3rd coat of poly?

I have a new pine floor with 2 coats oil based poly (no stain). I want to fill in numerous countersunk nail holes that were left unfilled. I...

Asked on 04/07/2021

0 answer

Will my tacky polyurethane eventually cure when average air temperature rises?

So, for lack of a proper shop, I was applying a first coat of undiluted Varathane Ultimate Polyurethane (oil based) to a plywood box using my dining room table under...

Asked on 04/06/2021 by Henry Taylor

0 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP