Woodworking Questions, Problems & Solutions : TransWikia.com ~ Page 10

What's a suitable lubricant for woodworking clamps?

I have several different types of clamps all of which I've noticed over time get a little harder to operate, the motion isn't as smooth or easy as I'd like....

Asked on 06/28/2021

1 answer

Router bit without shank

I inherited a router and stand from a neighbor who passed away. Nice router and stand, so I'd like to use it. It has an older model Sears router (315.17380)...

Asked on 06/27/2021 by Don H

2 answer

Filling an old hole to offset it a few mm and put in a fastener, what is the best approach?

Hi everyone I have a large dining chair where the factory drilled a hole that attaches the back 2-3mm off. The idea is to fully close up the hole and...

Asked on 06/27/2021

2 answer

Are 1.5"x1.5" poplar legs strong enough to support a 3'x2' hardwood top?

I'm building a mobile (not on wheels) kitchen island for my partner in our new apartment, as a first woodworking project. A 3'x2' top is about right for the space,...

Asked on 06/23/2021 by F McA

1 answer

How bore out a shallow sink into a 2x10"?

I have a set of standing shelves that are built from standard home store 2x10"s. I wanted to repurpose the shelf as a place for my houseplants. When I water...

Asked on 06/22/2021 by wcarhart

0 answer

What power tool is best suited to use for small straight cuts?

Hi guys I am wondering what is the easiest consistent way to cut small pieces of wood. Here is an example I recently recreated and it was a pain the...

Asked on 06/21/2021 by Woodworking Devil

1 answer

Angled cuts without miter saw or miter box?

I'm only just starting out on basic woodworking projects as a side hobby, and I don't have many tools. But a bigger problem is that I live in an apartment...

Asked on 06/19/2021 by Darin Beaudreau

2 answer

Search for metal brackets to join 1/4" plywood boxes

Ikea used to make these boxes that were made out of 1/4" plywood connected with 8 galvanized metal brackets that had an extra lip on the top that helped keep...

Asked on 06/18/2021 by zoops

5 answer

Is there an advantage to removing the guard on a grinder with a CBN wheel?

I've been reading about CBN "diamond" wheels (*) recently which apparently are great for sharpening woodworking tools. In comparison to traditional grinding wheels which apparently are fragile enough to...

Asked on 06/17/2021

1 answer

What to finish my pine loft bed with?

I'm buying a pine loft bed that comes sanded but unfinished. I'm wondering what the best finish to use would be. I have no experience finishing wood. I want to...

Asked on 06/16/2021 by Zorgoth

2 answer

Ask a Question

Get help from others!

Woodworking : Recent Questions and Answers (Page 10)

Ask a Question