TransWikia.com
  1. All Categories
  2. Electrical Engineering

Electrical Engineering : Recent Questions and Answers (Page 42)

Find answers to your questions about Electrical Engineering or help others by answering their Electrical Engineering questions.

USB Power Delivery over Type-A connector

I have a Xiaomi phone that came with a 33W charger. It says it does 5, 9, 11, 12 and 20 volt, so looks like a fairly normal USB-PD charger....

Asked on 02/13/2021 by Tor Klingberg

2 answer

Biased single-source relaxation oscillator not starting

Vcc is 5 V , first op-amp LM358 provides 2.5 V ground for easiest possible relaxation oscillator build with MCP661 (2.5/5.5 V supply, 60 MHz operational range). I wanted to...

Asked on 02/13/2021 by pholat

2 answer

What to study after discrete bjt amplifiers?

I am a novice interested in learning amplifier design for audio projects. I can design simple "elementary" amplifiers such as CE, CB, and CC and can make them work...

Asked on 02/12/2021 by nuggethead

2 answer

Amplfying MCU 113kHz output

I am using an ESP32 to generate a 113 kHz, ~3,5 V output. I then intend to amplify this to a ~50V peak-peak waveform. For that I am trying to...

Asked on 02/12/2021 by zexanana

0 answer

Measuring inductance of a cable

Its a little thought experiment. Below you see a transmission line consisting of 2 parallel wires. With an LCR meter, I am measuring the inductance of the cable. ...

Asked on 02/12/2021 by Yoomo

4 answer

Temperature control fails. Will a PID solve the problem?

I made a temperature control system without PID (just on/off with an offset) to control the temperature in a tank. I can only cool the tank with a cooling coil...

Asked on 02/11/2021 by hmmy92

2 answer

3.7 V to 12 V boost converter - effect on cell

If I boost a 3.7 V 18650 battery to 12 V with a boost converter, would it affect the durability of the battery? For example, if I have a 2100...

Asked on 02/10/2021 by Johnnie Nathan

3 answer

How to select a single component in Altium Designer using the PCB filter?

Using the PCB Filter, how can I select a single component easily (not its primivites)? Every now and then I have a complex component (such as an on-board PCB antenna...

Asked on 02/10/2021 by JYelton

2 answer

Is there a proper way to enable a digital counter?

I'm asking this because, while learning about how counters work, I read that one can add an input that enables or disables the counter depending on its logical value. Now,...

Asked on 02/10/2021 by Thomas.M

2 answer

Can propagation delays be simulated in Active-HDL?

I'm using the Lattice Diamond licensed version of Aldec Active-HDL. The logic circuits I'm working with are complex enough that I believe propagation delays could have an impact on the...

Asked on 02/10/2021 by Gacekky1

1 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP