Unix & Linux Asked by rarelyNecessary on December 6, 2020
I have a Seagate SSD expansion drive that I haven’t used in a few months that I’m trying to plug into my laptop (Lenovo Yoga 460 running OpenSUSE Tumbleweed). When I plug in the expansion drive, I’m not able to access it, and I think it’s making a faint beeping sound but I can’t quite tell.
It’s being recognized by lsusb
:
Bus 002 Device 002: ID 0bc2:231a Seagate RSS LLC Expansion Portable
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 138a:0017 Validity Sensors, Inc. VFS 5011 fingerprint sensor
Bus 001 Device 003: ID 04ca:705a Lite-On Technology Corp.
Bus 001 Device 002: ID 056a:504a Wacom Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
And when I run dmesg | tail - n 20
after plugging it in, I get messages about it being recognized:
[ 152.265336] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 152.286227] usb 2-4: New USB device found, idVendor=0bc2, idProduct=231a, bcdDevice= 7.07
[ 152.286229] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 152.286230] usb 2-4: Product: Expansion
[ 152.286231] usb 2-4: Manufacturer: Seagate
[ 152.286231] usb 2-4: SerialNumber: (Serial Number)
[ 152.869311] usbcore: registered new interface driver usb-storage
[ 152.879025] scsi host2: uas
[ 152.879653] scsi 2:0:0:0: Direct-Access Seagate Expansion 0707 PQ: 0 ANSI: 6
[ 152.880537] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 160.903627] usbcore: registered new interface driver uas
But when I run sudo fdisk -l
, there’s nothing listed for it, just my main laptop hard drive and the SD card I have inserted:
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Disk model: SanDisk SD8TB8U2
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 497E6685-2462-443E-8542-1FE0E694330E
Device Start End Sectors Size Type
/dev/sda1 2048 534527 532480 260M EFI System
/dev/sda2 534528 567295 32768 16M Microsoft reserved
/dev/sda3 567296 62007295 61440000 29.3G Microsoft basic data
/dev/sda4 498069504 500117503 2048000 1000M Windows recovery environment
/dev/sda5 62007296 166864895 104857600 50G Linux LVM
/dev/sda6 166864896 489678847 322813952 154G Linux LVM
/dev/sda7 489678848 498069503 8390656 4G Linux swap
Partition table entries are not in disk order.
Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CBFAF77A-19BB-4312-BD54-1C0BDC7C6084
Device Start End Sectors Size Type
/dev/mmcblk0p1 2048 31116254 31114207 14.9G Microsoft basic data
Similarly, when I try to run lsblk
, there’s nothing listed there out of the ordinary:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 238.5G 0 disk
├─sda1 8:1 0 260M 0 part /boot/efi
├─sda2 8:2 0 16M 0 part
├─sda3 8:3 0 29.3G 0 part
├─sda4 8:4 0 1000M 0 part
├─sda5 8:5 0 50G 0 part /
├─sda6 8:6 0 154G 0 part /home
└─sda7 8:7 0 4G 0 part [SWAP]
mmcblk0 179:0 0 14.9G 0 disk
└─mmcblk0p1 179:1 0 14.9G 0 part
Is there a way that I can still mount the hard drive?
EDIT:
Also doesn’t show up with lshw -class drive
:
*-disk UNCLAIMED
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@2:0.0.0
*-disk
description: ATA Disk
product: SanDisk SD8TB8U2
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 3101
serial: 180131802685
size: 238GiB (256GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=497e6685-2462-443e-8542-1fe0e694330e logicalsectorsize=512 sectorsize=512
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP