Super User Asked on December 13, 2021
I try to map a network resource to my local device.
I receive the following error: The local device name is already in use.
I have the problem to find which purpose the device is used for. I try a command net use and do not see it in the list, therefore, it is not mapped to a network resource.
Does anybody know how to see the list of all used devices in Windows 7?
I had a user with the same issue, but the solution was different. Scenario was they were getting this issue on their laptop, which we swapped out, and new laptop doing the same thing.
This network uses Meraki to control the access points, and they have setup a splash page to accept the terms and conditions of using the connection. Turns out this user never did that and kept getting issues when changing to ethernet to wifi. Click accept and everything is fine.
Answered by James on December 13, 2021
You need psexec if you can't see the mounted drives with "net use"
psexec \localhost -s cmd
Here you need to use "net use" again, delete if they show up here, then try mounting/reconnecting again.
Answered by b0k on December 13, 2021
I tried the top 3 Answers - 1. delete all mappings, 2. restart services and 3. delete reg key but those didn't work.
In a SO thread, solution given by @wimh fixed it for me. A system account was hogging the drive letter:
Answered by Skurfur on December 13, 2021
Replacing the hostname with its IP address solved the issue for me. Ping the hostname to find the IP address and replace the name with that IP address.
For example: I had this error with path \it-sharesoftwaredeployment
I replaced it-share
with its IP address like this: \172.x.y.122softwaredeployment
It worked!
Answered by Jeby Oommen on December 13, 2021
It may be a little late to answer this for the OP, but since others will continue to find this through search engines (like I did), I will add a solution that worked for me.
I work in an IT Department, and some of our users where experiencing this error today. The solution was to enable File and Printer Sharing.
AVG Anti-virus was used, so this option had to be enabled through the anti-virus firewall settings, and not Windows. So you'll need to adjust how you enable it if needed.
In my experience, shared drives never work when AVG decides to disable "File and Printer Sharing", though I'll always receive an error asking me to "check the spelling" or something similar. I have never seen it throw the "..Already in use" error until today.
Answered by Joseph Kreifels II on December 13, 2021
If you use a VPN to connect to the network that contains the network resource, the VPN can also cause this error:
In 'Network and sharing center', each network connection is given a network type (private/domain/home/public). I've seen situations where the VPN connection was stuck at 'Identifying...'. The network is considered Public until identification is finished, this means Windows Firewall will not allow connections to network drives via this connection.
Restarting the VPN usually solves the issue for me.
Answered by Hobbes on December 13, 2021
This sounds dumb, but I had it happen to me recently as well and I was pulling my hair out. Drives were set up with no credentials and there were no duplicate mappings. Drives were mapped by IP. In short, there should be no issues, but the drives would randomly disconnect for 2-3 minutes while in use.
It turns out that when I made a small network change, the users chose the "Public" option on the network popup instead of "Work".
Yes, switching it back to "Work" resolved it for me. You can do it under "Network and Sharing Center" from the start menu and then click on the Public icon to change it back to Work.
Answered by Mike H on December 13, 2021
I had this problem, here is a possible solution, make sure your sharing server has space left on the OS or root drive or "/".
I run a samba server on linux and the root drive was full. If samba can't create logs it crash and from the windows side it fails with the error "local device name is already in use" for some obscure reason.
Answered by Shodan on December 13, 2021
We had a Windows 7 laptop user whose printer was being mapped as the drive in question. But it wasn't showing up in Start->Computer
and it wouldn't show up when listing with NET USE
. However, if you went to Disk Management
there was a removable media
disk listed with no displayed drive letter that was mapped as the drive letter in question. If you right-clicked it, it would display EPSON in the properties.
We changed the drive letter to something that was not being used in Disk Management
.
I asked my boss why a printer would map a drive, and he said it was so that the printer itself would deliver the drivers instead of Windows having to download them; but it assigns a drive letter without notifying some other Windows components apparently.
The errors that we got for it were Event ID 4098 with error code 0x80070055
in the application logs and when trying to map the drive letter with NET USE
, Error 85 The local device name is already in use
.
Answered by leeand00 on December 13, 2021
I was having the same issue on a Windows Server 2008 SBS while i was trying to connect to an old NAS.
After trying each of the suggestions i saw here, i wasn't able to fix this.
During troubleshooting i found out that the root of the issue could be one of the assigned server IP's.
Indeed that was. I went to NAS logs and i saw that it was adjusted to connect with the NAS admin username and password under a specific IP address which was assigned to the server instead of server's main IP address!
So for future reference, i would suggest to check if you are under multiple NICS on your machine. If so you might have to remap the network share from a particular location.
Also, don't forget to read the logs of each device carefully.
Answered by Konstantinos Xanthopoulos on December 13, 2021
There's an outside chance the cause of this is that the share you're trying to reach doesn't exist or has been disabled.
Answered by Joe M on December 13, 2021
I ran into this today, on several windows 7 and linux clients mapping drives from a linux samba server. The problem turned out to be that my root drive on the server had run out of space. clearing up a few gigabytes and restarting the samba server fixed the problem.
Answered by Rudy on December 13, 2021
It happened to me when I woke the computer from overnight sleep. I started stopping service after service and it seems that the "Computer Browser" service was at fault in my case. Try:
net stop browser
net start browser
Answered by Gur on December 13, 2021
HKCUSoftwareMicrosoftWindowsCurrentVersionExplorerMountPoints2
If it still does not work, disconnect all mapped drives either from GUI or command line as in the previous post, delete the reg key above, and then log off and log on
Answered by Cliff Hogan on December 13, 2021
One possibility that I just ran into is that you've added a device to your system that causes other "auto mapped" devices to bump up over the mapped drive.
Say you have M:
mapped to a network drive, but you add a new harddrive that then causes all the removable drives (even though they don't have anything inserted into them) to bump up a letter (or two).
Now, suddenly, one of the removable drives is mapped to M:
, so your network drive can no longer be mapped to M:
, and when you try to remove the mapping, it'll give you a Device already in use
error.
Open up "Storage/Disk management" and check ALL the drives for any mapping that might be on top of the drive you want to map.
If there, just remap that drive to something else.
Then you should be able to use net use
to attach to your network drive properly.
Answered by drventure on December 13, 2021
You need to remap the drive.
First:
net use * /delete
Then remap it using net use again:
net use Z: \servershare /user:username password
Answered by dekyos on December 13, 2021
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP