Trouble frying an egg on a stainless steel pan

Question

I recently purchased a stainless steel pan from AllClad, but I'm struggling to use it. Food, and in particular eggs, seem to stick readily to the pan, making it hard to use. There is a question on Seasoned Advice that pertains to cooking an omelette on a stainless steel pan, but I think the challenges of frying an egg are different and more challenging. I've been able to cook an omelette in this pan, but have yet to succeed with a fried egg.

Looking online, I learned that stainless steel pans, like cast-iron, need to be seasoned in order to be non-stick. The process that I followed to season my pan was as follows:

Pour in 1/4 cup walnut oil. 
Heat pan on medium heat until the oil begins to smoke.
Turn heat off and let the pan cool completely.
Remove the oil and wipe the pan dry.

I tried this process, but when I try to fry an egg in the pan, it still sticks readily. There is some improvement, but it is still not possible to cook an egg without sticking that destroys the egg in the end.

I'm not sure what I may be doing wrong, or is a stainless steel pan just not something that one can use for frying eggs? Should I just expect that there will be some stick whenever I use this pan?

Update

After watching this short course on pay frying, I tried to pre-heat my pan, using the water-test as a guide, and adding just a bit of oil to the pan before dropping the egg in. The results were the same. The egg stuck to the pan thoroughly. So again I'm not sure what I'm doing incorrectly. Maybe the oil I'm using isn't right? I've been using ghee.

Update 2:

I've yet to succeed in frying a egg on this pan, but a few additional questions/issues have surfaced:

Some answers here have suggested that despite the presence on the web of tutorials for "seasoning" stainless steel pan this is not necessary and may not be advisable.
The trick may be to fry the egg starting at a much lower heat then you might with something like a piece of meat. For meat, you often encounter the suggestion to use the "water test", but as at least one answer has suggested here that may not work with a fried egg.

These are the possibly insights I've gleaned so far, but I've also yet to succeed, so these may turn out to be wrong as well.

Satisfying Answer (May be others)

The solution that I have settled on here -- i.e. what finally worked for me -- was to work with lower heat than I thought was needed, and not to season the pan. There is definitely a lot of conflicting information out there about stainless steel pans. There are a great number of blog posts and YouTube videos that talk about how to season a pan. Seasoning may still be a useful thing to do, but I was able to fry an egg on an unseasoned pan finally.

The method I used is more or less as follows:

Clean pan thoroughly.
Take egg out of refrigerator and let it sit in warm water for five minutes or so. (This may not be necessary.)
Put pan on stove on medium flame/heat. (I only tried this on a gas stove.)
Let pan pre-heat until it is warm when you hold your hands over the pan. Warm, not hot! This might take 20-30 seconds, maybe less. 
Add the oil (1-2 tbsp), and lower the flame to low. Let the oil heat a bit, perhaps another 10-15 seconds, or less.
Crack the egg into the pan. The whites should stay clear, only slowly whitening. If the egg begins to turn white immediately, the pan is too hot. And the egg should also not stick at this point. There may be a bit of sticking, especially around the edges. You can dislodge the sticking gently by hand, but don't mess with the egg too much. Cook until done or ready to flip. Make sure heat stays low. If you see some sticking it may be (I'm not sure about this) because the pan has become too hot.

So that's the best I've been able to do with help from the selected answer.

user60799 · Accepted Answer

From your description there are two things that stand out to me:

1) stainless steel pans should NOT be seasoned in a manner similar to cast iron.  These are completely different materials, and if you "seasoned" your stainless pan, such that it has a coating of basically burned oil on it, you have to first clean that pan until it's nice and shiny/bare steel again.

2) using the sizzle test for eggs suggests to me the pan is too hot.  For eggs, you always want to use lower heat to prevent them going dry and sticking (even in a non-stick pan, you will have some sticking if you use high heat for eggs, especially when scrambling)

so try this:  clean your pan.  when ready to cook the egg, heat the pan on medium heat.  to test for hotness, hold your hand close to the surface to see if it feels warm.  obviously, don't burn yourself ;)  add your ghee to the pan and let it heat a little longer until it looks very fluid and shimmery.  swirl the pan to distribute the oil, then add your egg(s) and do your thing

Terry · Answer

I have two All Clad tri-ply stainless steel pans. First things - these pans are much more efficient. The highest heat level I use is medium high. That's for searing only, then reduce heat to medium for cooking.  Seasoning the pan, I preheated the pan on the stove you can trust with a drop of water. If it bubbles the pan is ready then turn the heat off.

Use whatever oil you cook with. Remember this well - Oil will affect the taste of your food. Use a paper towel to wipe excess oil off the pan. I did this twice before I cook on it. You could check All Clad website for more details.

PS. I only use high temperature to boil water in the pan. Always wipe pan thoroughly dry after washing it with soap and water and soft sponge only.

Cos Callis · Answer

Like the OP in this previous question (Why do scrambled/fried eggs stick less when cooked with butter instead of oil?), I believe you are blaming the equipment when the fault may well lie with the operator...

See this answer and the linked material there (especially the Alton Brown video) to improve your technique.

The keys are thoroughly warming the pan and oil to a medium heat and patience.

(should this be considered a duplicate question?)

JimmyJames · Answer

I have had a set AllClad pans for over a decade and I had this issue at first but here's what I do that mostly avoids sticking:

Heat: I throw small drops of water on the pan.  If they dissipate immediately the pan might be a little too hot.  If they turn into little balls that roll around as if there is no friction, then it's perfect.
Use Butter: I prefer this to oil mainly for the flavor but it also is helpful to know whether the pan is the right temperature.  If it starts bubbling hard and browning, it's too hot.  You can still use it but turn the heat down.
Once the butter has laid down flat and the water has left it, you can drop the eggs in.  My eggs are cold from the fridge so I usually turn the heat down after they have warmed a bit.
Wait a bit before breaking the yolks.  The yolk sticks a lot more than the whites.  For scrambled eggs, I typically wait for the white to go translucent and then gently break the yolks.  Let the yolk harden a bit and then fold.  At this point I let turn the heat way down (off even) and let them get to the desired consistency.

This typically results in no sticking that would require more than a brush or scouring pad.  I would recommend getting some Bar Keeper's Friend powder for maintaining the pans especially if you want to keep the outside of them looking nice.  What's worse than eggs is burned-on oil and you are bound to do this at some point especially if you use the pan for searing.  Detergent won't put much of a dent on that.  The oxalic acid will take it off in seconds with a little elbow grease.  Baking soda is also a decent option for this.  Kosher salt can be used in a similar manner for eggs if you really get them stuck.

Chandler · Answer

Use plenty of fat! I always fry my eggs in butter - I love the flavor. Use plenty so it creates a nice puddle for your eggs. I have no difficulty in my pan either on high heat (you must stay there and babysit it!) for brown butter; or lower and slower. Yumm. Always delicious, easy, never seasoned a stainless steel pan in my life. Chandler. Good luck.

Answered by Chandler on November 25, 2020

Jody Steed · Answer

Here’s the best answer, based on decades of cooking at home and decades of life experience and much time spent researching this:
Don’t use stainless steel to cook eggs. At all. No professional chef does this. At all. Use cast iron or nonstick pans for eggs. Period.

Harry Yankuner · Answer

I have an All Clad SS pan, a non stick pan, a lodge cast iron and I have fried an egg with a small amount of butter on low heat and the egg does not stick.
It slides around the pan more easily than any other pan.

Trouble frying an egg on a stainless steel pan

7 Answers

Add your own answers!

Ask a Question