Reverse Engineering Asked by msacco on October 1, 2021
I have an HID device that I’m trying to re-create using Arduino, I have captured the USB packets and I have pretty much analyzed all the data I need to operate the device, the only thing I’m not really sure about is how I should actually recreate the device with the Arduino device in terms of connection.
There is a software that detects and connects to my HID device, therefore I’d need to make the Arduino being detected as this device. I’m not really sure what would be the way to achieve that, is it related to PID and VID of the HID device? I assume there are much more than that that needs to be set in order to actually achieve that.
Almost any Arduino is capable of USB communication (at least low speed). There is difference if you need software (for example V-USB) or it has hardware support. Unless your board has dedicated USB output (which usually also mean hardware support) you also need to make required connector to USB cable (watch for appropriate signal voltage level (3.3 V)). And no, USB port used for uploading your program to Arduino cant be used as it is usually only USB to serial converter.
And now for software part. You need same VID and PID as your existing device so Windows (I assume you use them) can use correct driver and then you need to implement algorithm on your Arduino which depends on used USB implementation so look at examples available for your implementation.
In case you find Arduino inadequate for your task you can look at other ARM MCU development boards (for example Nucleo). Which are faster and more powerful.
Answered by Rok Tavčar on October 1, 2021
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP