TransWikia.com
  1. All Categories
  2. Network Engineering

Network Engineering : Recent Questions and Answers (Page 3)

Find answers to your questions about Network Engineering or help others by answering their Network Engineering questions.

How can i optimize this network

I got a router on a stick and I want to optimize it by reducing its cost and also the configuration costs This topology is to facilitate inter Vlan routing...

Asked on 09/30/2021 by Yoneakaski

2 answer

Why we define pool for declaring CISCO router DHCP?

In case declaring DHCP server in CISCO routers, should define pool with network addresses.↓ Example Router(config)#ip dhcp pool net1 Router(dhcp-config)#network 192.168.1.0 255.255.255.0 The router has predefined interfaces ip address and...

Asked on 09/30/2021 by mgae2m

2 answer

How to configure u -turn nat in palo Alto firewalls

My requirements is users wants to access public hosted web -sites of same organization from intranet we are having palo alto firewall deployed as perimeter firewalls...

Asked on 09/30/2021 by Sagar Uragonda

1 answer

Understanding L2 Switch (Network Noob)

I currently have the setup on the left and it works just fine... I use it to transfer data between laptop and embedded systems hardware device. (Data...Not internet) Question: What...

Asked on 09/30/2021

1 answer

Does tcpdump work differently from Omnipeek?

I have been trying to analyze packets using tcpdump. I am trying to use a wireless card and capture packets through monitor mode, instead of promiscuous mode, since I want...

Asked on 09/30/2021 by DJay

1 answer

Do I need to re-authenticate every time I switch a access point?

I have multiple Access Points on the same network with a Radius server for authentication. When I switch from one AP to another, do I have to go through the...

Asked on 09/30/2021 by Tushar Malpani

2 answer

Connecting switches together

I have L2 switches which will be daisy chained together (yes I know, daisy chaining isn't great, but anyway..) The L2 switches will then link to a L3 switch. Both...

Asked on 09/30/2021 by The_Bear

2 answer

Cisco SG-350 Switch and Fortigate Firewall Configuration

I'm not what you would call a Network Engineer, but right now i have a (somewhat) complex network problem that i have to solve. I must configure a SG-35028p cisco...

Asked on 09/30/2021 by Santiago Hernández

3 answer

Connect switch to router

I have a switch with 4x 10Gb SFP+ ports. Can I use one of the SFP+ ports to connect to a router with a fiber cable?...

Asked on 09/30/2021

2 answer

Access printer in VLAN1 from VLAN2

I have a network printer (Brother MFC-L8690CDW) connected to Cisco RV340W (with latest firmware) on VLAN1. I have installed driver and it works as usual no issues there. Now we...

Asked on 09/30/2021 by maytham-ɯɐɥʇʎɐɯ

2 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP