Motor Vehicle Maintenance & Repair Asked on December 16, 2020
3/4 of a quart will probably not cause damage, but it may cause some foaming if the crank is dipping into the sump. I wouldn't worry.
You could crack the drain plug and drip out that amount if it bothers you.
Answered by SteveRacer on December 16, 2020
i'd recommend checking the level on the dip stick, a little over wont hurt. but ultimately the correct answer is to drain the oil to the correct level.
Answered by Watermelon on December 16, 2020
Disclaimer: I've never tried this myself.
Is it close to being time to change the oil filter? Depending on its position, you should be able to spin it off without losing much more than the oil contained within (which should be ~0.5-0.75 litre). Replace it with a new (empty) one and run the engine for a minute or two then recheck the oil level.
The oil filter seems to be a horizontal mount so it's going to be messy. However, it appears to be sufficiently above the sump that you won't lose any more than the oil in the existing filter.
Depending on whether your oil filler tube goes into the block or into an OHV cover, you might be able to syphon off a litre or so through it.
Edit:
Looks like you add oil through the valve cover so you can scratch option 2.
Answered by user16128 on December 16, 2020
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP