Motor Vehicle Maintenance & Repair Asked on February 8, 2021
I have a Citroen C3 2006 petrol engine that for some reason it never been used from new. It only have 33 km, it was stood all this time, obviously without battery.
Now we are trying to start it but it is only turning but not starting.
so we already changed inlet, injectors, all spark plugs, fuel pump.
spark is coming well fuel is coming as well and we made a compression test and is making around 9 and 10 psi
Now we noticed that when opening and locking the car from the door lock it is locking and opening only the drivers door
Ok, 9-10 psi, are you SURE about that? If so, this engine has a major problem. Generally the compression should be 90-100 psi or more depending on the engine. But you're nowhere close to that. Are you sure you're using the compression gauge properly?
For an engine to run you need air, fuel, compression, and spark. You've addressed fuel and spark, and I'm assuming you have air. But without compression it will not run at all.
Just guessing here but I'm thinking you have stuck valves and/or rust in the cylinder bores which have ruined the rings.
Answered by jwh20 on February 8, 2021
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP