Motor Vehicle Maintenance & Repair Asked on July 24, 2021
The AC clutch on my Jeep Liberty 2006 won’t engage. Here is what I have checked so far.
Fuse 14 in the passenger cabin
21 in the engine compartment are ok
AC relay ok
When I jump the AC relay I am able to engage the compressor and get cold air, pressure at rest is about 105 pounds at 60 degree F. When the compressor is running it drops to 35 psi. I can’t check the high pressure side because I don’t have a gauge for it. If I jump the low pressure switch nothing happens. Not sure where to go from here.
Does anyone have an idea of what could be wrong?
What could be the root cause of this behavior?
It may be a blown fuse. AC compressor clutches receive power in a number of ways. They can activate through a relay that’s energized directly by a proper condition of the low and high pressure switches. Or, the relay can be operated by the PCM which has interpreted the condition of the low and high pressure sensors.
Answered by wilkvolk on July 24, 2021
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP