Home Improvement Asked on December 27, 2020
I have a heat pump system that is increasing the humidity in the house when it is in heating mode. So much so that when the heat pump comes on condensation starts to form on the windows.
It only affects the rooms where the heat pump is heating and even then it is not equal. For example, I have one zone that has two rooms. When the heat pump comes on the windows in one room fog up, but in the other room which is directly adjacent they do not, so the moisture might just be coming from one supply–not sure how that could happen.
How can I further diagnose and fix this problem?
If your drip tray in the inside unit has standing water this will cause high humidity when heating. Other than this there is no way for a heat pump to generate moisture in heat mode.
Answered by Ed Beal on December 27, 2020
This is the natural phenomenon of condensation. The increase in temperature changes the dew point of the air, and the cold windows start to form condensation since they are below the ambient dew point. This is the same reason why the part on your fridge between the freezer and refrigerator is heated. The cure is either to warm the windows, or cool the air next to them. You can use curtains or sheer to keep a layer of cool air trapped next to the glass. An exterior insulating film could help keep them a little warmer, but I'm not aware of any such product.
Answered by RyanJMcGowan on December 27, 2020
Get help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP