Home Improvement Asked on February 10, 2021
Unfortunately my house does not have an attic, so I cannot put a large reservoir there, which would the ideal for running a valve-type (tankless) toilet.
Can I install instead one of those old fashion pull chain type type tanks (like in the “Godfather”) high near the ceiling and then feed it to the valve on the toilet? Will that work, or does it require a higher drop?
Fifty years ago for two years I used one of those old fashioned elevated tanks about 7 ft or more above the toilet, and it flushed great, but was noisy. You gave a vigorous pull on a chain and it started a siphon.
However, this went directly into the toilet; it did not go through a valve as on a commercial toilet. I would bet those require 25 psi minimum and maybe 35 psi which would require 58 ft of head or 80 ft, respectively.
Water supply specifications for a typical manual commercial toilet flush valve such as the Kohler K-13517 call for a static pressure of 35 pounds per square inch and a flow of 25 gallons per minute.
Answered by Jim Stewart on February 10, 2021
Get help from others!
Recent Questions
Recent Answers
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP