Can I install a nest thermostat on a 2-wire boiler (with unmarked wires)?

Question

Our house has an old boiler, and the thermostat isn’t working. I’d like to replace it with a Nest thermostat. But, when I took the cover off to check which wires it had, I only see two wires (red and white) and they aren’t marked. I checked the Nest compatibility guide, but it asks me to identify the wires, and I have no idea which ones they are.

Here’s 3 pictures of the thermostat:

Can anyone tell me how I can figure out which wires they are? Could I install a Nest E thermostat on this?

nest thermostat

Here's 3 pictures of the thermostat:

Can anyone tell me how I can figure out which wires they are? Could I install a Nest E thermostat on this?

Kevin Reid · Accepted Answer

If you have only two wires on a heating system, then those two wires are the ones known as R (red) and W (white), and it doesn't even matter which one is which because it's AC and there are only two. (If you had a more complex system with cooling or other features for the thermostat to control, then there would be more wires.)

To confirm, get a multimeter and measure the two wires on the AC voltage mode (you should see about 24 volts). If you hold the wires together the heat should start. If this doesn't work, the problem may be with the boiler rather than the thermostat.

You probably know this already, but just in case: your old thermostat has a significant amount of mercury in it. Make sure to take it to a household hazardous waste disposal station rather than putting it in the trash.

Can I install a nest thermostat on a 2-wire boiler (with unmarked wires)?

One Answer

Add your own answers!

Ask a Question