Find answers to your questions about Engineering or help others by answering their Engineering questions.
(I was informed on the Physics board that this is an Engineering question, therefore they closed it there, and I moved it here) First, I have next to zero formal...
Asked on 08/31/2021 by RTC
1 answerI would like to design a single stage planetary gearbox using standard gears. There appears to be three primary conditions to ensure the geometry of the gears will fit -...
Asked on 08/31/2021 by Brian L.
1 answerI'm modelling a fatigue disbond using abaqus. I've understood the disbond growth rate is equal to: $$dfrac{partial a}{partial N} = c_3 Delta G^{c_4}$$ I've set up...
Asked on 08/31/2021
0 answerI am having a small 2.5cc methanol 2-stroke engine that I am building an electric starter mechanism for. From my research I was under the impression that for a 2-stroke...
Asked on 08/31/2021
1 answerI meant to get a countersink for wood. Then in the hardware store, beside the countersinks, I saw a glass/tile drill bit set, which as a pack, is not so...
Asked on 08/30/2021
1 answerI need to fixate something at adjustable approximate angles. It doesn't need to have a lot of holding power. So the idea is to have washers/nuts that are serrated, that...
Asked on 08/30/2021 by Dehbop
1 answerI have a small, 5 gallon, pancake compressor which has a maximum 150PSI rating. Unfortunately, it doesn't have the air capacity to power the demands of an HVLP paint sprayer...
Asked on 08/29/2021
3 answerWhen specifying the depth of a cut, should the dimension start from the datum surface or from the surface where the cut will be made? In the example below, a...
Asked on 08/28/2021
1 answerI wanted to see if the force acting at A (30 kN) would create a deflection from OB other than twist. In other...
Asked on 08/25/2021
2 answerIs there any recommended/suggested/required penetration rate for a miniature cone penetrometer? A 20mm/s is for a standard size of cone penetrometer, what about for miniature one?...
Asked on 08/20/2021 by shemelyn
1 answerGet help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP