TransWikia.com

What's a good replacement for a Deore LX 3x10 front derailleur?

Bicycles Asked by Gabi on January 16, 2021

I recently acquired a Novara Randonee 2014 that came with a Deore LX 44-32-22 crankset, a 10-speed 11-32 cassette, and a Deore LX front derailleur with a stuck and stripped H screw. I broke that screw with a misguided attempt to drill it out. The derailleur still shifts, but poorly. Uphill, when there’s tension in the chain, it cannot drop the chain from the middle to the small chainring, nor can it lift the chain from the middle to the large chainring. On level ground it shifts OK. This is with a SRAM TT500 friction bar end shifter. My guess is that even if the H screw broke stuck at the correct limit — so it does not affect the performance — this derailleur must probably go because of its other shifting troubles. If I am wrong, I would be grateful for any advice about how to make the derailleur shift properly. And if I am right, what 3×10 front derailleur would do a better job with this crankset and shifter?

One Answer

Almost any Shimano 3x10 MTB Derailleur, but Deore FD-M6000 is a good match for what you have now.

Be careful that you match the clamp band type and that you get the correct down pull / top pull version to match your current one.

Down pull is where the cable rises from the bottom bracket.

https://bike.shimano.com/en-US/product/component/deore-m6000/FD-M6000-M.html

Or

https://bike.shimano.com/en-EU/product/component/deore-m6000/FD-M6000-H.html

Correct answer by Warren Burton on January 16, 2021

Add your own answers!

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP