TransWikia.com
  1. All Categories
  2. Bicycles

Bicycles : Recent Questions and Answers (Page 98)

Find answers to your questions about Bicycles or help others by answering their Bicycles questions.

Wheel Building - Should key spoke be inside or outside flange?

I’m working on my first wheel build and reading a lot of articles about spoke patterns. Some articles say the key spoke (drive-side, to the right of the valve) should...

Asked on 06/02/2021 by Brett DeWoody

5 answer

Barrel Adjuster Strategy - What's the best way to use barrel adjusters?

I was taught that barrel adjusters are to be used as an on-the-road way to adjust brakes or derailleurs. I think the exact quote was "Leave the barrel adjuster for...

Asked on 06/02/2021

3 answer

Are single chainring mountain bikes usual?

I just bought my son a typical+ mountain bike in a typical Frech sports shop (a BTWIN 530 at Décathlon) and realized that it has only a single sprocket at...

Asked on 06/02/2021

6 answer

What groupsets are compatible with my bike?

Question Speaking generally, what things do you need to check about your bike (e.g. rear hub width and type, braze-on vs clamp on front derailleur attachment points, etc) in order...

Asked on 06/01/2021

4 answer

Replacement Rear Axle Sizes on Vintage Bike

I bought this 1990 Raleigh cheap on eBay. It had been sitting in a garage for decades and it was barely running when I picked it up....

Asked on 06/01/2021

2 answer

My bike keeps making this grinding noise around the back wheel/casette/chainring area when I get speed on a tech/ jump trail

It is an older bike that hasn't been used in years and I recently got it serviced and began using it on the trails. It is a specialized stumpjumper...

Asked on 06/01/2021 by Nevan Jaksic

1 answer

Nexus IGH reluctant to shift after applying load

I ride a belt drive bike with a Shimano Nexus SG-C6001-8D IGH. I'm aware of the normal cable adjustment procedure (aligning yellow marks on the hub), I've done...

Asked on 06/01/2021 by user4520

1 answer

Long bar ends as drop-downs?

There's a pair of long bar ends that I came across on Decathlon (https://www.decathlon.in/p/4407859/cycle-handlebars-stems-and-grips/3-position-long-bar-ends). I was wondering if these could be rotated 180 degrees (from upright position)...

Asked on 06/01/2021

3 answer

Difficulties with cleat pedals

I have bought Shimano SPD pedals and MTB shoes recently. After riding for a while with cleats I decided to go back to regular pedals as I had trouble getting...

Asked on 06/01/2021

5 answer

Can I replace a Shimano MF-Z012 (freewheel) with a MF-TZ510?

Can I replace a (6-speed) Shimano MF-Z012 with a (6-speed) MF-TZ500 or MF-TZ510 freewheel? Bonus question: apart from the "T" both models seem to...

Asked on 06/01/2021

1 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP