TransWikia.com
  1. All Categories
  2. Bicycles

Bicycles : Recent Questions and Answers (Page 29)

Find answers to your questions about Bicycles or help others by answering their Bicycles questions.

Running multiple dynamo lights on a single dynohub

I have a Shutter Precision PD8 hub, and a B&M headlight. I happen to have a spare B&M headlight of a different model in my parts bin. I'm thinking about...

Asked on 08/24/2021

1 answer

Will this mix of Shimano 10 speed components work together?

My goal is to cobble together a 1x10 groupset using some Shimano 105 5700 shifters. From what I have read, I think that these components will work together, but...

Asked on 08/24/2021

3 answer

Why are both Schrader and Presta valves still used on tubes?

It is standard for road bikes to adopt Presta, whereas nearly all else use Schrader. I personally think Schrader are better:I've had fewer Schrader...

Asked on 08/24/2021 by jakc

11 answer

Correctly and incorrectly mounting a bicycle

I am very fond of mouting bicycles this way:Stand to the left of the bike.Put the left foot on the left pedal.Push forward with the right foot to set the...

Asked on 08/24/2021

5 answer

Right of way for a raised crossing?

The new Cycle Superhighway 3 goes through Hyde Park, London,UK on West Carriage Drive. It contains a number of points at which pedestrians are evidently intended to cross, as the...

Asked on 08/24/2021 by private101

3 answer

Can't reassemble Shimano bar-end shifters

I have a Shimano (I think Dura Ace) 10-speed rear shifter from around 2008, it came on the aero bars of a Cervelo P2-SL. Like a genius I took...

Asked on 08/24/2021 by idoimaging

3 answer

Bits "peeling off" schrader valve?

I've got a bike that hadn't been used in a while until a couple weeks ago, it was in a place where it gets direct sunlight (I'm trying to fix...

Asked on 08/24/2021 by Gregorio Litenstein

2 answer

Rear axle for Alexrims DC 4.5 Disc 26" MTB wheels w/ Formula hubs

I've acquired a pair of old Alexrims DC 4.5 Disc 26" MTB wheels with Formula hubs, but the rear wheel is missing the axle. I've been reading various posts about...

Asked on 08/23/2021 by MarkyMark

2 answer

What would happen if I don’t replace worn drivetrain components?

What would happen if I took a entirely new drivetrain and just never replaced anything? Of course, I’d keep it clean and lubricated. With 11 and 12 speed chains being...

Asked on 08/23/2021

9 answer

How to reset my gears after the chain slips off?

I don’t know much about bikes so whenever my chain slips off I always just force it onto the cog I can get it on. I think this has been...

Asked on 08/23/2021

2 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP