Bicycles Questions, Problems & Solutions : TransWikia.com ~ Page 22

What era/country/manufacture is this vintage step through?

During my search, I’ve learned that this question can be very irritating for many. I think it’s because the asker is looking to make a buck or a fortune and...

Asked on 09/04/2021 by MattC

1 answer

Brand new Shimano BB-UN300 hard to spin when drive side is fully torqued

I'm installing a brand new BB-UN300 (68x122mm) into a 1991 Specialized Sequoia (replacing the pitted cup and cone BB). Out of the box, the BB doesn't spin very freely by...

Asked on 09/03/2021

1 answer

How to lace a 36 hole 4x9 grouped spokes?

does anybody have any information on how to lace a 36 hole 4x9 grouped spokes? I am thinking to buy a set of rims of this make, but I am...

Asked on 09/03/2021

3 answer

bottom bracket refacing

I bought a new frame (online) intending to build up the bike. It will be used for recreational rides on gravel/dirt paths mostly. The frame has an English-threaded bottom bracket...

Asked on 09/03/2021

1 answer

Frame dropout cracked, what can I do? (Allied Alfa Disc / carbon)

The frame thru axel hole/dropout cracked while using my wahoo kickr trainer.Is this crack dangerous?If it is, what can I do?...

Asked on 09/02/2021

2 answer

Anyone seen a hollow crank spindle cut through by an internally-routed derailleur cable?

I just want to share a recent observation, but I have to pose it as a question. A person showed me an FSA Gossamer 30mm hollow crank spindle broken into...

Asked on 09/02/2021 by Henry S

1 answer

Pavement riding in Scotland

I've just moved to Edinburgh, and I understand that the land reform act 2003 lets me cycle on most land, excluding certain places like some highways or ministry of defense...

Asked on 09/02/2021

5 answer

Derailleur indexing problem - doesn't change from 8 to 7 but skips form 3 to 1

I just fitted a new 8 speed Shimano cassette (CS-HG41-8) and chain (CN-HG40) to my new turbo trainer (Elite Suito). Answers to my previous question suggest that this should work...

Asked on 09/02/2021

1 answer

9/16 pedals wont go in crank - they're too big

What about if you have two gears on the crank. I used a 5/8 open wrench to take out my original pedals on my Schwinn Sierra and the new 9/16...

Asked on 09/02/2021

4 answer

Indoor trainer suitible for sprinting

Are there any types of indoor trainers that are suitable for training sprints insofar as they allow the rider to tilt the bike to get leverage as one would when...

Asked on 09/02/2021

3 answer

Ask a Question

Get help from others!

Bicycles : Recent Questions and Answers (Page 22)

Ask a Question