Looking for Techniques for Riding Uphill on a Single Speed

@GuyZee covers most of the technique side, but I'd like to add that if you're experiencing difficulty climbing hills, you should also use a lower gear. Faster cadences are a great way to build up your endurance and help with the hill climbs to boot.

Spinning is winning!

I am with M. Werner - couldn't be better said!

A compromise idea might be to use 3-speed, Sturmey Archer hub gear.

There is a minor weight penalty and that handlebar lever will completely ruin the look of the bike, however you will get a gear for the hills/speedy standing starts, a cruising gear and an overdrive gear. You do have to ease off the pedals to change gear but you can also change when stationary. 3-speed is fun because you can rapidly downshift to first, go into high cadence mode, clear whatever you need to get past and then shift back to the cruising gear. Externally minimalist and bulletproof (I have a 3 speed from 1954), 3 speed will set you apart from those single-speeders lumbering away from the stop lights.

Implementing 3-speed could be a fun project if you build your own wheel from any old junk 3-speed wheel. The clips, cable and shifter are readily available after market for small sums, they will also fit onto your frame without requiring dropouts or any other frame bolt-ons. If you go with Sturmey Archer you will also have genuine retro, timeless classic-ness added to your bike.

Given that you're riding a single-speed, my advice would be: Coast down the hills, and pedal up. This conserves your energy best and gives you more power going uphill.

The reason is that a certain amount of downhill pedaling is wasted. Gravity will pull you down a hill, so you have to pedal a certain amount just to go faster than gravity would move you anyway.

Uphill, on the other hand, every bit of energy you expend is useful.

So you'll be most efficient if you coast down and pedal up.

As another suggestion - replace your single speed rear hub with a Sturmey Archer 2-speed, Duomatic hub. This is operated by back-pedaling, so you get to keep the clean, simple look of a single-speed, but you get a lower gear for hills. I have one - it works great.

The simplest answer is conditioning. Try pushing yourself hard for three minutes with three minute recoveries. Do this three times on the way to work. Do the workout two or three times a week. I ride a single speed ten to twenty miles a day before work. Using this simple program I got to the point where I was able to ride a single speed forty miles at altitude in a few weeks. Regarding equipment a higher saddle often helps with climbing.

I have cycled to Holland from London and to Ireland and am about to cycle again to Holland, through Belgium and into France.

I agree strongly with Frank. Conditioning is what it's all about. The only thing I would add is;

1. Going up hills on a SS - keep your breathing constant and powerful - work the lungs.

2. Push hard into the climb and then stand when you have to and then do what I call the push ups motion, pulling upward on the handlebars into your body and working hard.

3. There will be some hills where you have no option (and it is quicker) to get off and walk) but if you repeat steps 1 and 2 for a couple of months with decent distance on a regular basis, then your body will pump you up the hardest of hills.

4. Keep hydrated throughout - and if doing long distances eat the right foods - full of carbs, like flapjacks and snickers bars! That and energy drinks have helped me push hard up hills for years. Simplicity is key (although I do not discredit anyone's more advanced knowledge of changing cogs etc - I would try that if I could afford to out of curiosity).

5. Don't think too much! Keep yourself in a calm state and concentrate on your rhythm and not on cyclists around you or motorists (at the same time obviously keeping them in mind for safety!).

Good luck soldier.

I'd agree with most that has been said (Campagnolo excepted, some people just don't get simplicity!). Like most things, practice makes things easier by a combination of strength build up and technique refinement. I regularly do distances of 40+ miles on my fg and haven't changed cogs, position, equipment once it works. So much is psychological rather than physical! I guess that if you read this after a year or so riding ss you've either cracked the difficulty and are gloating, or you're still finding hills tough. Hope it's the former! My wife has just got a ss and loves the immediacy of riding up hills. You say you're young and strong, as a 60 year old I guess I could say that my fg is keeping me old and strong! Enjoy.....

I agree with the advice given by @GuyZee: It's all about momentum. Make sure you have established a rhythm with your cadence (rolling start) and just before the climb, push and never look back! I do this personally, with the addition of adapting a road biker's stance (leaning slightly forward at least) and it works quite well. Not to mention that the next time I climb that hill, I feel considerably stronger and more confident.

I ride a SS fixed gear 3 times a week. My advice when the hill is hard and steep is to do what feels natural.

use single speed for high end and just rely upon your grip on handle and pedals.Doing so u can increase the inertia of your mtb so that it moves way along with u. Secondly,if u use fenders in rain,please remove them if not required.That's all i can say.

In contrast to the accepted answer:

• of course, stand up
• pedal calmly, do not pull the handlebars in (because that causes inscreased knee stress)
• sway. Move your body up and foreward, then step and stand on the pedal; repeat

The point is to never have to "pull on the bars and push hard". That's tiring and unhealthy.