Bicycles Asked by PSM on August 20, 2021
I noticed that when going at low speed without pedalling the freewheel sometimes seems to engage anyway and pulling the chain until there is enough tension ( as the rear derailleur contracts due to the chain being pulled ) to overcome it and to let the wheel spin free again.
I also noticed this effect by spinning the cassette by hand with the wheel removed from the bicycle. When spinning it there are points in which it gets stuck and wont let go until I either try to turn it with enough force or I spin it to the opposite direction slightly and then continue. This might happen a couple times per rotation.
I have tried looking for similar problems online but havent been able to find anything, maybe because I’m not sure what to look for as I’m new to biking and I’m trying to learn a bit by repairing this kind of problem my self. I thought of dismounting the cassette and cleaning everything up in case that somehow solves the problem but I wanted to ask first to see if there is any specific solution.
The bicycle is almost new, only having a month or two, so I wouldn’t think it has anything to do with wear. Its a Talon 29 1 in case it’s of any help.
There's a sprung pawl mechanism that is responsible for allowing the cassette to drive the wheel in one direction and coast in the other direction.
The problem you're having is indicative of something not right inside that mechanism. Possible examples are the pawls or springs being out of place, mangled, or not made to spec.
Freehubs not breaking in correctly is something that happens, and there's not much a user can do to either cause or prevent it. One path to issues occurring is if the lubrication inside is too thick, it can cause the pawls to not spring up fast enough, which can cause partial engagement, which can in turn cause damage. Once any of the parts are damaged, the problems escalate.
It's possible that if you were able to disassemble the freehub body completely, there might be a correctable problem. Actually doing that for a looseball cassette hub is seldom done and usually requires special tools. It's also finicky and on the advanced side. And, it's more likely that at this point something is damaged inside.
In my experience, when a freehub is giving the symptom you describe of taking force to break free and rotate in the coasting direction, something is destroyed inside and fixing it is impractical. There are many freehub problems that can be solved with lubrication or thinning out the existing lubrication, but this isn't one of them.
You should take it back to where you bought it for warranty help. The ideal solution is to put a new freehub body on it, which is a quick fix if one is available. Shops have an unfortunately hard time with having access to replacement freehub bodies for bikes they sell, so this is not always practical. From there the options are either new hub or new wheel, which likely won't be OEM graphics/color-matched. I would be accepting of either.
If getting it warrantied isn't an option, it probably makes the most sense to just go for a new wheel, or re-hubbing the existing rim if you want a project. Continuing to ride it is a recipe for it failing at an inopportune time.
Correct answer by Nathan Knutson on August 20, 2021
Get help from others!
Recent Questions
Recent Answers
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP