Absoluteblack oval chainring doesn't completely fit GRX crankset

Question

I'm trying to install an absoluteblack oval chainring on a GRX FC-RX810-1  crankset.
After assembling and tightening the bolts I noticed there's a gap between the chainring and the crankarm.
Basically, only 1 out of 4 bolts puts the chainring totally flush, the other 3 have about 1mm gap (see the photos below).
I'm wondering is this acceptable or should be considered a defect?
Thank you.

Stanislav E. Govorov · Accepted Answer

Thanks everyone for your help, this indeed doesn't look normal. I ordered a wolftooth oval chainring instead. It has no threads in the bores and fits perfectly.

Nate W · Answer

For future reference, these particular chainrings will fit just about any Shimano 4 bolt EXCEPT the GRX. They mount a bit strange compared to many chainrings as you can see in this image, the bolt comes through the crankset from behind and screws into the chainring.

Compatibility
Shimano Dura-Ace 9100, R9120, R9150 & R9170 Di2, Ultegra 8000, R8020, R8050 & 8070 Di2., >105 R7000, R7020, R7070, Dura-Ace 9000, Ultegra 6800, Shimano 105 5800, Tiagra 4700 ; 10 >/ 11 / 12spd compatible. In short ALL Shimano 4 bolt cranks except GRX.
Chainring has 1.5mm offset towards frame for perfect chainline.

Source: Absolute Black

Absoluteblack oval chainring doesn't completely fit GRX crankset

2 Answers

Add your own answers!

Ask a Question