1. All Categories
  2. 3D Printing

3D Printing : Recent Questions and Answers

Find answers to your questions about 3D Printing or help others by answering their 3D Printing questions.

Z offset in Marlin is not working recently

My printer is ignoring the "Z offset" setting in Cura and the "Bed Z" stored in the printer LCD settings? It has been working before but after a firmware update...

Asked on 12/23/2021 by DarkH2O

2 answer

Is there a way to save a multi part print if one fails?

I'm printing 6 separate parts in one go, after 4 hours of printing one part failed, but the other 5 are printing nicely. Is there a way to prevent the...

Asked on 12/11/2021 by Nerdroid

3 answer

How to center my prints on the build platform? (Re-calibrate homing offset)

When I print large prints close to (but not exceeding) the maximum dimensions of the heated build platform on my Anet A8, the brim or skirt or the print itself...

Asked on 12/07/2021

2 answer

Adhesion problems with masking tape

I have been playing around with the bed for a while and I still can't get the first layer to stick properly. I think I am getting the bed leveled...

Asked on 12/02/2021

5 answer

Can PETG be used as support material for PLA?

Printing supports, either complete, or partially from PVA have not always resulted in successful prints according to my experience with the filament (used in a dual extruder Ultimaker 3 extended)....

Asked on 12/02/2021 by 0scar

2 answer

Marlin won't start up on modified CR10s

I have been adding a Hemera and BLTouch to my CR10s, and finally finished everything, flashed the firmware, and everything worked fine. However, I forgot about one thing (Probe_to_Nozzle_Offset), so...

Asked on 12/02/2021

0 answer

Ender 3 Won’t Start - flashing screen and blue LED on main board

Just received my second Ender 3 (see my other questions for the problems that first one developed). Figured it best to have a spare while I upgrade my first one...

Asked on 11/27/2021 by Gone Coding

1 answer

Limit Switch problems on RAMPS 1.4 and custom built 3D Printer running Marlin 1.1.0-rc6

So I am trying to fix a custom built 3D printer for my institute and am running into a problem I can't wrap my head around. So the limit switches...

Asked on 11/20/2021 by Tech_Support

2 answer

Print quality ruined after firmware update i3 mk3

I'll try to give as much detail as I know here but let me know if there is anything missing. I have a Prusa i3 MK3 that I got in...

Asked on 11/18/2021

0 answer

Why is BLTouch Still Probing Off the Bed Even When `NOZZLE_TO_PROBE_OFFSET` is Set?

So I am almost finished upgrading my CR10s with Hemera and BLTouch hardware, however I can't get past this one problem. In the picture, you can see that the probe...

Asked on 11/17/2021 by Bagel03

1 answer

Ask a Question

Get help from others!

© 2024 All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP