Woodworking Questions, Problems & Solutions : TransWikia.com ~ Page 5

How to keep the thread of a vice clean?

I'm finding that a lot of debris is falling onto the thread of my vice and sticking to the grease that's on there to lubricate it. What techniques are there...

Asked on 08/30/2021 by Guy

3 answer

How to make a joint between two pieces of wood look good?

I’m building a counter top and I had to join two pieces of boards with some glue in between. The countertop looks pretty okay, but the joint is very obvious...

Asked on 08/30/2021 by CuriousPaul

2 answer

Is rebate/rabbet joint with glue only strong enough?

If I use a rebate to joint 2 boards together, is it mandatory to use screws/nails to support it or will the glue alone hold just fine? My main concern...

Asked on 08/30/2021 by Anatoly Vasilyev

2 answer

How to straighten AC plywood for desktop

I'm building a very simple work-from-home desk, with 3/4" AC fir plywood for the top. The plywood has a concave bow on the top side. How do I straighten...

Asked on 08/30/2021 by zwiebelspaetzle

1 answer

Variation in shades of maple wood

I went out and bought some hard maple for my desk. I've already glued the boards together to make the tabletop, but I noticed some variation in color between the...

Asked on 08/30/2021 by atulw

1 answer

Butt joints on both sides on the same piece of wood

While planning and designing a cabinet, I made a wrong assumption of making two butt joints J1 and J2 on the same side of a piece of wood. While doing...

Asked on 08/30/2021 by galaticos23

1 answer

Is it possible / a good idea to use plywood for mortise and tenon joints?

I was thinking about making a pantry cabinet using 3/4" plywood. To join them, I was considering using mortise and tenon joints between the sides and backboard. I couldn't find...

Asked on 08/30/2021 by Huckle

1 answer

What test is being performed on this wood stock?

This video on glulam beam production shows a brief clip of some kind of test or measurement being made on wood boards prior to lamination into a glulam beam: ...

Asked on 08/30/2021

1 answer

What is a router plane fence designed for?

Recently I bought a veritas router plane and I noticed that they provide an optional fence.（and with smaller blades） As I'm...

Asked on 08/30/2021 by LehrLukas

1 answer

Is Khaya more durable and a better flooring choice (based on quantitative hardness, density, etc.) than "genuine mahogany"?

I am having a hard time placing Khaya/African mahogany. An article states:Varieties of mahogany include Honduran, South American, Peruvian, Bolivian, Cuban, Big Leaf and True. All of them are typically...

Asked on 08/30/2021

0 answer

Page 5 of 21
‹ Previous
1
2
3
4
5
6
7
8
9
Next ›
Last »

Ask a Question

Get help from others!

Woodworking : Recent Questions and Answers (Page 5)

Ask a Question