TransWikia.com
  1. All Categories
  2. Woodworking

Woodworking : Recent Questions and Answers (Page 18)

Find answers to your questions about Woodworking or help others by answering their Woodworking questions.

How to stabilize a bar table with hairpin legs

I'm doing a one-off project for a much-needed small dining space in the holiday home. I have a set of 4 hairpin legs at 106cm each that I want to...

Asked on 01/20/2021 by Cherry

0 answer

Sharpening stone identification

Can anyone tell me if this is a oil sharpening stone or water sharpening stone? It was my grandfathers, and I would like to put an action, but not sure...

Asked on 01/19/2021

1 answer

Cutting a 2mm wide / 3mm deep groove

How can I cut a groove between say 1.5mm to 2.5mm wide using the Dremel Cutting guide in the 565 kit? The cutting bit 561 is too wide at 3.2mm....

Asked on 01/17/2021

2 answer

How to make Handrail Transitions with Rotation?

We removed the old handrail that was not up to code and didn't reach the first step of the stairs as required. We have a traditional guardrail installed on...

Asked on 01/14/2021

1 answer

Didn't wait long enough for tung oil to dry before applying wax - can I just leave it be?

Ok, I am pretty new to woodworking. I treated some poplar with half tung oil, half citric oil (for thinning the tung oil and facilitating absorption). I waited 24-48 hours...

Asked on 01/10/2021

1 answer

Tips for recognizing aged pressure treated wood

New lumber that is pressure treated will have tags that identify the chemical used. More noticeably is the green or brown colors from the treating process. So newer wood is...

Asked on 01/10/2021

2 answer

I have separate, finished pieces. How to assemble them?

This question is woodworking-related. Recently, I found in the attic (in France) the wood pieces shown on this photo. There are:1 round, flat, 40-cm diameter disc, with a hand-carved, 5mm-deep...

Asked on 01/10/2021 by Manu

0 answer

Fully threaded screws

It seems to me that fully threaded screws are commonly used to join wood, but I cannot see how any clamping force can be attained. Surely screws with some plain...

Asked on 01/07/2021 by Mike Kenefeck

3 answer

What type of clamp is this?

This is a long (almost 6' / 2m) clamp. Its similar in function to a US pipe clamp but the main body is a wood block, with notches cut or...

Asked on 01/03/2021

1 answer

Why won't my miter saw cut all the way through my work piece?

I have a cheap miter saw. When I saw something the blade does not go all the way through. The blade does not reach entirely between the fence and the...

Asked on 12/29/2020 by Sjoerd

4 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP