TransWikia.com
  1. All Categories
  2. Motor Vehicle Maintenance & Repair

Motor Vehicle Maintenance & Repair : Recent Questions and Answers (Page 295)

Find answers to your questions about Motor Vehicle Maintenance & Repair or help others by answering their Motor Vehicle Maintenance & Repair questions.

Electrical issue on throttle press - BMW 328i

So i have a BMW 328i that is having an electrical issue, It seems whenever the throttle is pressed the lights on the dash light up and power to the...

Asked on 12/04/2020

1 answer

'07 Escalade - AC issues

2007 Escalade AWD. Yesterday, I noticed that the air conditioning keeps turning on and off. To clarify: the control unit does not indicate that it's turning off. I...

Asked on 12/04/2020 by 3Dave

1 answer

2001 Honda Civic EX overheating fans not working

Okay so I have tried everything. My car was overheating so I replaced the head gasket since it needed one anyways, but it is still overheating. My cooling fans are...

Asked on 12/04/2020 by Noah Lovett

1 answer

consequences of using an oil extractor?

It is better to drain oil rather than use an oil extractor because it seems the extractor will leave behind some a significant amount of oil whereas a drain will...

Asked on 12/04/2020

2 answer

Brake Caliper play

2011 Nissan XTrail T31 Diesel, 110kw. Service guy changed the brake pads yesterday and now there's a vibration when braking slowly at low speeds. Brakes hold fine in other situations....

Asked on 12/04/2020 by eonootz

1 answer

How to re-torque a partially loosened overhead camshaft?

While doing a timing belt service on my 17 year-old, 57K-mile truck (DOHC), I was having a very hard time getting it to let go of the front oil seals...

Asked on 12/04/2020 by Ryan V. Bissell

2 answer

Honda Civic 2014 Air Box - What is the type of bolt and socket needed?

I want to remove the Air Box from a Honda Civic EX 2014. What is the bolt type or code?What is the socket do I need? ...

Asked on 12/04/2020 by Maximus Decimus

1 answer

Torque setting range, set to high end?

I replaced the front struts and pads and rotors on a Hyundai Accent a couple months back. I used This Manual for the correct torque settings. I...

Asked on 12/04/2020 by eaglei22

1 answer

Should a rotor be replaced if its surface is coarse or rough?

When I was in the store to replace tires, the mechanic said I should replace two rotors. The back rotors are smooth when I touch them but both front rotors...

Asked on 12/04/2020

1 answer

Are these roller bearings okay? One is gray, the other muddy

A year ago, I cleaned out all the bearings in solvent, removed ALL old grease, and repacked with Red Line CV-2 synthetic grease. The bearings have 300k miles, give or...

Asked on 12/04/2020

3 answer

Ask a Question

Get help from others!

© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP