Find answers to your questions about Engineering or help others by answering their Engineering questions.
I have seen several forums related to this question about the difference between observers and estimators in control theory and could not understand it clearly. I wanted to know how...
Asked on 05/11/2021 by gari
0 answerI have obtained two diffusion pump stages from a pair of very old Vacuubrand high vacuum pump. The rotary vane pump in one of them was dead and another overheating....
Asked on 05/11/2021 by The_Vintage_Collector
0 answerI'm working on a prototype electronic consumer product for which I intend to use silicone molds with polyurethane casting to get the plastic body. I have seen a few products...
Asked on 05/11/2021
0 answerI'm designing a part, and I'm trying to figure out what distance a slot should be from the bottom of the part. For simplicity in analysis, I'm approximating the...
Asked on 05/10/2021 by fp.monkey
2 answerIn my project I have to choose a form tolerances ( parallelism ) between the handle ( purple part ) and the part that sits inside it ( the grey...
Asked on 05/10/2021 by Sam B
1 answerWhat happens to air flow and propeller efficiency if it is moving with Wind perpendicular to rotation axis. The air is blowing in a direction lying on the Planet...
Asked on 05/10/2021 by CoffeDeveloper
1 answerI have a 50 HP screw compressor that has just began to load and unload within 10 seconds when previously would take between 40 and 60 seconds. Nothing has been...
Asked on 05/09/2021 by Anthony Smith
1 answerWhat I did was I found the $I_{short circuit(AB)}$ = 10/5 = 2A by shorting AB. How am I...
Asked on 05/09/2021 by neutrin0
0 answerSee below for an extract from a general arrangement drawing from the 1980s. It makes reference to a '9" rocker slab' which appears to be a slab supported by steel...
Asked on 05/09/2021
1 answerOther than the usual silvered mirrors, that are expensive to form into parabolas, what can be used as an effective reflector in parabolic troughs/dishes. I saw a few people tried...
Asked on 05/09/2021
0 answerGet help from others!
Recent Answers
Recent Questions
© 2024 TransWikia.com. All rights reserved. Sites we Love: PCI Database, UKBizDB, Menu Kuliner, Sharing RPP