Problem with STM32 and SDFat lib on other SPI port

Question

I am using STM32F103C8 and I am triing to compile a code with SDFat library. The problem is I need to use the second channel of the SPI1 (pins PB5,PB4,PB3, PA15):

I found out that is possible to use SDFat lib and include SPIClass inside its constructor. Then I could use this code:
SPIClass SPI_1(PB5,PB4,PB3, PA15);
SdFat sd(&SPI_1);

The problem is this compliation error:
no matching function for call to 'SdFat::SdFat(SPIClass*)'

Do you have any idea how to solve this error or how to work with SD card on different pins?
Here is source code of this library:
https://github.com/greiman/SdFat/blob/master/src/SdFat.h

LucasN · Answer

Ok, I found out that the sdFat library is not supported on stm32 bluepill (sd card HAL peripherals are not enabled), so I decided to use basic Arduino SD library (it uses SPI commands, not HAL).
Also I have to change pins (from SPI1_1 to SPI1_2) in variant.h and PeripheralPins.c files of bluepill board. - And finally it works (SPI1_2).

Problem with STM32 and SDFat lib on other SPI port

One Answer

Add your own answers!

Ask a Question