ADB dumpsys batterystats - How does one read it?

The energy consumption by Android devices is estimated based on the amount of time certain hardware components are residing in different states (e.g., WIFI ON, WIFI OFF, etc.). For each hardware component, there is a power value for each state of the component provided by the manufacturer. So with the amount of time a hardware component resides in a certain state times the power value, the actual energy consumption is calculated.

Each time a state change is triggered, an event is recorded in the batterystats tool. The batterystats tool collects the events based on a timestamp starting from 0 at the mentioned RESET event.

Your questions:

(1) The timestamps in the batterystats output start from the last reset of the batterystats tool. You can manually reset the timestamp with then batterystats reset command. I don't know what are the exact triggers within the Android system to reset the batterystats, probably when the battery is fully charged.

(2) As you mentionend you have the system time of the RESET event. You read the example +21h44m19s: 21 hours 44 minutes and 19 seconds since the RESET event.

(3) Whatever you mean with "real timestamps" you transform them to any date format you like by adding the batterystats timestamp to the reset time. The batterystats output cannot be changed.

This is a partial answer that needs more details through the full dump to understand whats the and read the output of what the system is trying to convey.

The data unit is a number taken from the following list: 1: Number of objects 2: Number of bytes 3: Number of milliseconds 4: Number of allocations 5: Id 6: Percent s: Number of seconds (monotonic time) Default value for data of type int/long is 2 (bytes).

Breaks down to what I think is:

The data unit is a number taken from the following list:

1: Number of objects = (4)

2: Number of bytes {057}

3: Number of milliseconds. +21h44m19s484ms wake_lock=1000 screen screenwake=1000

4: Number of allocations wake_lock=1000, screen screenwake=1000

5: Id. android.policy:POWER

6: Percent s: Number of seconds (monotonic time) Default value for data of type int/long is 2 (bytes).

https://android.googlesource.com/platform/system/core/+/master/logcat/event.logtags

The time value starts at boot to current breaking the time down to.

+21h44m19s484ms First the time since thw device was bopted and reads like:

21h is 21 hours.

44m is 44 minutes

19s is 19 seconds

484ms is 484 milliseconds.

However there is more going on since it reads line by line meaning one line is not the complete story. In order to understand whats going on the full log or dump is crucially needed.